Target Barcode Systems verify that printed barcodes on labels or products are readable and correct. Target Systems are applied to automatic assembly operations in food, pharamaceutical and other industries where barcodes are commonly used for product identification.

Screening with Target Barcodes Systems during assembly may identify errors at a point in the assembly process where correction can occur, preventing improperly labeled items from being distributed or reaching consumers.

Target Systems capture statistics that can build confidence that assembly operations are reliable. Or demonstrate that improvement is needed.

• Use fixed mount, high speed barcode scanners to read codes on moving items.
• Apply to conveyor systems, label feeders, insertion equipment and other assembly operations that move material.
• Configured with 1 to 4 scanners, each inspecting for a common barcode.
• Operations are automatic.
• A positive result enables the system for the next inspection.
• A negative result generates an error output signal that may be used to divert material, stop the operation or other appropriate error action.
• More on High-Speed Target Systems

• Use a single hand held scanner to inspect stationary items.
• Rely on an operator to initiate the scanning action.
• Report results with display, audible tone and two output signals.
• Good output may be used to advance a process sequence such as indexing a conveyor to the next station.
• Bad output may be used for alarm or alternate motion.
• More on Handheld Target Systems

• Portable Barcode Scanner with Target Logic and Reporting for quality sampling.
• Scanning Sessions sample quality metrics within production operations.
• Scan barcodes and compare to Target, Report results via display and audible tones.
• Save metrics in the portable database, transfer to PC through docking station.
• Resume sessions from database for multiple scans throughout a production cycle.
• More on Portable Target Systems